|
|
Halon Recovery / Recharge Fm 200 Sodium Bicarbonate Mix All Clean Agent Replacements
|
|
|
|
Clean Agent Recovery / Recharge Systems / Nitrogen Separators / Filtration / Tanks
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
WHY BUY FOUR MACHINES for clean agent? Our competition will have you believe you need four machines to use with clean agent. IT HAS COME WE CAN PROVE THEM WRONG.
Conforms to NFPA 10 3.3.5.2 and EPA Final Ruling 63FR 42728 Federal Regulations
Our Clean Agent Systems are made with the best parts available. Using Stainless steel braided lines that will not crack. Duel internal bypass safety valves instead of pop off valves that waste chemical and fill the room with agent. Engineered to meet all regulations and standards.
|
|
|
|
CLEAN AGENT RECOVERY RECYCLE SYSTEM P/N 60043
* Comes with Certification of Compliance * Multi-agent use * Halon 1301 * Halon 1211 * HFC 227 (FM 200) * FE-36 * FE 25 * HFC 125 * Halatron * Novec 1230
$4500.00
|
|
|
|
* Stainless Steel Braid Hose * Highest quality components * Transfers up to 20 lbs per minute * Operates on 120 PSI * Recovers to 15" vacuum * Inlet pressure to 1000 PSI * Safety relief bypasses internally * Closed Recovery * Over 99% efficient * 2 Year Warranty
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
CLEAN AGENT RECOVERY / RECHARGE TABLE TOP WORK CENTER FOR HAND HELD EXTINGUISHERS P/N 60058
* Easy uncomplicated operation * Multi-Agent use * Works with all agents like our Recovery / Recycle System * Compact bench top design * Filters out contaminants * Stainless Steel lines * Closed Recovery * Recovers to 15" vacuum * 2 Year Warranty
$3500.00
CLEAN AGENT / CO2 TABLE TOP WORK CENTER FOR HAND HELD EXTINGUISHERS INCLUDING CO2 P/N 60059
* Same as above but with CO2 Refill all in one work station
* $4650.00
|
|
|
|
|
|
|
|
|
 |
|
|
|
Male Quick Connect Adapts your cylinder to the system. Included with System
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
 |
|
|
|
DB1SS
Nitrogen Separation System
* Removes nitrogen from clean agents including Halon 1301, Halon 1211, HFC 227 (FM 200) FE-36 and most all other gases
* Reduces to 99.8%
* Easy to program without buying additional control units
* Uses Liquid nitrogen for cooling.
* No refrigeration unit to maintain.
* 2 Year warranty
$17,500.00
|
|
|
|
|
|
|
|
|
|
|
PARTS AND ACCESSORIES
|
|
|
|
|
|
|
STAINLESS STEEL HOSE REPLACEMENT KIT $365.00 Replacement Kit for Getz HR 1301 or HFC 227 $415.00
|
|
|
Charge Gas Regulator
$135.00
|
|
|
|
Clean Agent 4 Way Selector $385.00
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
Clean Agent Bypass Valve $340.00
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
RECOVERY TANKS * Pressures 260 PSI to 400 PSI SIZES * 26 lb * 47lb * 123 lb * 239 lb * 1000 lb
|
|
|
|
|
|
|
50 lb Duel Port Tank Great for small qty service Many sizes below $91.10 Each
|
|
|
|
 |
|
|
SELECTOR VALVE ORING KITS
Replacing your Orings annually in the selector vale will give years of trouble free service.
60021 Selector valve Kit $20.00 60022 Selector Valve Kit Getz HR 1301 $20.00 60023 Selector Valve Kit Getz HR 1211 $20.00
|
|
|
|
|
|
|
|
|
|
|
Liquid / Vapor Tank connection lines with 3 way valve Allows you to reuse recovered nitrogen from any agent. Reduces vapor full cylinder conditions
|
|
|
|
 |
|
|
|
|
|
50 lb Recovery Cylinder line Adapts smaller recovery cylinders to the system
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|